move hw into subdirectory

1 files changed, 0 insertions, 102 deletions

diff --git a/okm.kicad_dru b/okm.kicad_dru
deleted file mode 100644
index 5a2a111..0000000
--- a/okm.kicad_dru
+++ /dev/null
@@ -1,102 +0,0 @@
-(version 1)
-#Kicad 7
-
-# 2-layer, 1oz copper
-(rule "Minimum Trace Width (outer layer)"
-	(constraint track_width (min 5mil))
-	(layer outer)
-	(condition "A.Type == 'track'"))
-
-(rule "Minimum Trace Spacing (outer layer)"
-	(constraint clearance (min 5mil))
-	(layer outer)
-	(condition "A.Type == 'track' && B.Type == A.Type"))
-
-# 4-layer
-(rule "Minimum Trace Width and Spacing (inner layer)"
-	(constraint track_width (min 3.5mil))
-	(layer inner)
-	(condition "A.Type == 'track'"))
-
-(rule "Minimum Trace Spacing (inner layer)"
-	(constraint clearance (min 3.5mil))
-	(layer inner)
-	(condition "A.Type == 'track' && B.Type == A.Type"))
-
-# silkscreen (Kicad 7 only)
-(rule "Minimum Text"
-	(constraint text_thickness (min 0.15mm))
-	(constraint text_height (min 1mm))
-	(layer "?.Silkscreen"))
-
-(rule "Pad to Silkscreen"
-	(constraint silk_clearance (min 0.15mm))
-	(layer outer)
-	(condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == 'graphic')"))
-
-# edge clearance
-(rule "Trace to Outline"
-	(constraint edge_clearance (min 0.3mm))
-	(condition "A.Type == 'track'"))
-
-# This would override board outline and milled areas
-#(rule "Trace to V-Cut"
-#	(constraint clearance (min 0.4mm))
-#	(condition "A.Type == 'track' && B.Layer == 'Edge.Cuts'"))
-
-# drill/hole size
-(rule "drill hole size (mechanical)"
-	(constraint hole_size (min 0.2mm) (max 6.3mm)))
-
-(rule "Minimum Via Hole Size"
-	(constraint hole_size (min 0.2mm))
-	(condition "A.Type == 'via'"))
-
-(rule "Minimum Via Diameter"
-	(constraint via_diameter (min 0.3mm))
-	(condition "A.Type == 'via'"))
-
-(rule "PTH Hole Size"
-	(constraint hole_size (min 0.15mm) (max 6.35mm))
-	(condition "A.isPlated()"))
-
-(rule "Minimum Non-plated Hole Size"
-	(constraint hole_size (min 0.5mm))
-	(condition "A.Type == 'pad' && !A.isPlated()"))
-	
-(rule "Minimum Castellated Hole Size"
-	(constraint hole_size (min 0.6mm))
-	(condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'"))
-
-# clearance
-(rule "hole to hole clearance (different nets)"
-	(constraint hole_to_hole (min 0.5mm))
-	(condition "A.Net != B.Net"))
-
-(rule "via to track clearance"
-	(constraint hole_clearance (min 0.254mm))
-	(condition "A.Type == 'via' && B.Type == 'track'"))
-
-(rule "via to via clearance (same nets)"
-	(constraint hole_to_hole (min 0.254mm))
-	(condition "A.Type == 'via' && B.Type == A.Type && A.Net == B.Net"))
-
-(rule "pad to pad clearance (with hole, different nets)"
-	(constraint hole_to_hole (min 0.5mm))
-	(condition "A.Type == 'pad' && B.Type == A.Type && A.Net != B.Net"))
-
-(rule "pad to pad clearance (without hole, different nets)"
-	(constraint clearance (min 0.127mm))
-	(condition "A.Type == 'pad' && B.Type == A.Type && A.Net != B.Net"))
-
-(rule "NPTH to Track clearance)"
-	(constraint hole_clearance (min 0.254mm))
-	(condition "A.Pad_Type == 'NPTH, mechanical' && B.Type == 'track'"))
-
-(rule "PTH to Track clearance)"
-	(constraint hole_clearance (min 0.33mm))
-	(condition "A.isPlated() && B.Type == 'track'"))
-
-(rule "Pad to Track clearance)"
-	(constraint clearance (min 0.2mm))
-	(condition "A.isPlated() && B.Type == 'track'"))